N

News

Carver Pump Selects TURBOdesign Suite by Advanced Design Technology

25 June 2012

NEW YORK and Muscatine, Iowa, – June 26, 2012 – Carver Pump (Carver) in Muscatine, Iowa, one of the world’s leading centrifugal pump manufacturing companies, selected the TURBOdesign Suite by Advanced Design Technology (ADT), for development of its newest line of RS multistage ring section pump offerings. Carver’s RS series was designed to maximize efficiencies in moderate to high pressure pumping solutions and is now available in five basic sizes with overall performance to 1,000 horsepower (HP). Turbomachinery design engineers and original equipment manufacturers (OEMs) looking to dramatically decrease design times while increasing product efficiencies also will benefit from the ease-of-use provided via the 3D inverse design process available in ADT's TURBOdesign Suite.

ADT Previews TURBOdesign Volute Module at Turbo Expo 2012

21 May 2012

LONDON and COPENHAGEN – May 17, 2012 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite, will exhibit in Stand 1902 at the American Society of Mechanical Engineers (ASME) Turbo Expo 2012, presented by the International Gas Turbine Institute (IGTI), June 11-15 in Copenhagen, Denmark. ADT will preview its new TURBOdesign Volute module and demonstrate new 3D inverse design capabilities soon to be available in the TURBOdesign Suite.

ADT Founder to Present Paper on 3D Multi-Disciplinary Optimization for Turbomachinery at 2012 SIMULIA Community Conference

29 April 2012

LONDON, UK – April 30, 2012 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite, today announces that its founder and director, Mehrdad Zangeneh, will present on an innovative and commercially viable solution for three-dimensional (3D) multi-disciplinary optimization of turbomachinery blades at the 2012 SIMULIA Community Conference (SCC) , May 15-17, in Providence, R.I., United States. Zangeneh will present his paper Wednesday, May 16, at 9:50 a.m. in Room 553 - Session 4C: TURBOMACHINERY Isight Applications. According to SCC organizers, “Continuing a 26-year tradition of providing high-quality content and valuable exchange of industry knowledge is made possible by the dedication of our customer community. The 2012 SCC is no exception.”

ADT to Showcase Latest Turbocharger Development Tools at IMechE 2012

17 April 2012

LONDON, UK – March 17, 2012 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite, today announces that it will exhibit at Stand no. 7 in the Maxwell Suite at the 10th IMechE International Conference on Turbochargers and Turbocharging (IMechE), May 15-16 in London.

ADT Sponsors FAN 2012, Provides Speaker on 3D Inverse Design

15 March 2012

LONDON, UK – March 15, 2012 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite, today announces that it will sponsor FAN 2012 – International Conference on Fan Noise, Technology and Numerical Methods, to be held in Senlis, France, April 18-20, 2012.

TDT Celebrates One Year as ADT Distributor and Provider of Turbomachinery Design Software and Engineering Services

01 March 2012

Golden, Colo. – February 28, 2012 - TURBOdesign Technology, Inc. (TDT), an aerodynamic and hydrodynamic turbomachinery design software and engineering services company, will soon mark its first full year as exclusive U.S. distributor of Advanced Design Technology’s (ADT) TURBOdesign Suite. The timing of TDT’s anniversary coincides with its newest free webinar, “Key Advantages of 3D Inverse Design in Turbomachinery Design Process,” which will be presented on March 21 at 1:00 p.m. Eastern time.

ADT Webinar: Key Advantages of 3D Inverse Design in Turbomachinery Design Process

01 March 2012

The method used for design of turbomachinery components has a major impact on the extent a manufacturer can deal with these commercial drivers. Conventional or direct design approach is typically based on some CAD representation of the blade geometry and iterative changes to the geometry using feedback from some form of flow analysis code. The design process relies heavily on the previous experience of the designer, gained over many years. Experienced designers can achieve good performance. But due to the nature of the design process, designers tend to stay within their comfort zones and as a result restrict the design space.

ADT Webinar: Choice of Optimal Blade Loading for Centrifugal Compressors and Vaned Diffusers

11 January 2012

Short Abstract: This one hour educational webinar will highlight the main flow features in compressor impellers, identify the main sources of aerodynamic loss and provide guidance in the choice of optimal blade loading to suppress particular flow phenomena, such as secondary flows in industrial compressors, inducer shock in high pressure ratio impellers with splitter blades or corner separation in vaned diffusers.

ADT Webinar: Design Centrifugal and Mixed-Flow Pumps for Optimal Blade Loading

05 January 2012

Short Abstract: This one hour webinar will present how the 3D inverse design method TURBOdesign1 coupled with 3D CFD code TURBOdesign CFD design can be used to optimise the efficiency and cavitation performance of pumps.

Pages