- +44 (0) 20 7299 1170
- Login to site
- info@adtechnology.com
- Book a Demo
ADT - TURBOdesign Suite User Group Meeting 2014 Announced
27 August 2014
LONDON, UK and NEW YORK, NY, USA – August 27, 2014 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite today announces the first TURBOdesign Suite User Group Meeting to be held on November 6th and 7th, 2014 in Central London, UK.
ADT Unveils New Turbomachinery Design Optimization Methods at ASME Turbo Expo 2014
09 June 2014
The 6th European Turbomachinery Conference will be held at, Le Nouveau SiËcle, Lille, France between March 7th - 11th 2005.
ADT to Exhibit at the 11th International Conference on Turbochargers and Turbocharging
15 May 2014
Advanced Design Technology, a global leader in the development of advanced turbomachinery design methods, is delighted to announce that they will be exhibiting at the 11th International Conference on Turbochargers and Turbocharging, 13th-14th May 2014, London.
Turbomachinery Design Optimization for Fuel Economy at SAE World Congress 2014
12 March 2014
LONDON and NEW YORK – March 14, 2014 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite, today announces that a paper entitled, "Application of 3D Inverse Design Based Multi-Objective Optimization to Axial Cooling Fan with Large Tip Gap" co-authored by Mehrdad Zangeneh, Ph.D, professor of thermofluids at University College London and founding director of Advanced Design Technology (ADT), is among those being presented at this year’s prestigious SAE 2014 World Congress. Design engineers and original equipment manufacturers, especially those desiring to meet and exceed state-of-the-art fuel economy levels can benefit by shortening development times and improving components efficiency and emissions using the three dimensional (3D) inverse design methodology being presented in the paper.
Daikin Applied Achieves Multimillion Dollar Performance Gains on New HVAC Compressor Designs via 3D Inverse Design
29 October 2013
LONDON, NEW YORK and MINNEAPOLIS – October 29, 2013 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite today announced that its customer, Daikin Applied of Minneapolis, Minn., a Fortune 1000 company and the largest heating, ventilation, air conditioning (HVAC), and refrigeration company in the world, is developing a new, ultra-efficient compressor design—potentially capable of achieving multimillion dollar performance gains—by using TURBOdesign Suite. Turbomachinery design engineers and original equipment manufacturers (OEMs) working to achieve higher performance levels to meet new U.S. and international efficiency standards can take advantage of the first commercially available 3D inverse design software system, TURBOdesign Suite.
VINAS, Valeo and ADT to Present on 3D Inverse Design Methodology at VINAS 2013
30 September 2013
NEW YORK, LONDON, and TOKYO – October 1, 2013 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite, today announces that three presentations scheduled for the VINAS 2013 Conference to be held October 10 and 11 at the Tokyo Conference Center Shinagawa will focus on ADT’s TURBOdesign software and its time-saving, efficiency and optimization capabilities using 3D inverse design methodology. One presentation will be a customer case study by Dr. Manuel Henner of Valeo Systhemes Thermiques. Turbomachinery design engineers and original equipment manufacturers will benefit from the information about the 3D inverse design methodology in ADT’s TURBOdesign Suite.
TURBOdesign® 2013 Pump Initiative showcases at Texas A&M 29th Pump Symposia
16 September 2013
Houston, Texas, NEW YORK and LONDON – September 16, 2013 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite, will exhibit in Booth 1618 at the Texas A&M 29th Pump Symposia, October 1-3, at the George R. Brown Convention Center in Houston. ADT will showcase its TURBOdesign® 2013 Pump Initiative, which was developed to show participants how to develop breakthrough designs in significantly less time while also reducing computational fluid design (CFD) analysis requirements. In support of the Initiative, ADT will host a free pump design seminar in room 343A of the Hilton Americas Houston from 5:30 to 7:30 p.m. on Wednesday, October 2. Pump design engineers and original equipment manufacturers will benefit from the 3D inverse design technology in ADT’s TURBOdesign Suite and from ADT’s TURBOdesign® 2013 Pump Initiative.
TURBOdesign® 2013 Pump Initiative Launches
12 August 2013
LONDON and NEW YORK – August 15, 2013 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign® Suite today announces the launch of its worldwide TURBOdesign® 2013 Pump Initiative in which users will learn to develop breakthrough designs in significantly less time while also reducing computational fluid design (CFD) analysis requirements. The initiative will last through November and entails a series of five free pump design webinars, online hands-on test drives, and introductory product pricing. Turbomachinery designers and original equipment manufacturers (OEMs) will benefit from the next evolution of three-dimensional (3D) pump design as a result of participating in the TURBOdesign Pump Initiative 2013 and by using the 3D inverse design methodology in TURBOdesign Suite.
Demonstration on how to Achieve Increased Efficiency and Reduced Emissions for Standards Compliance at ASME Turbo Expo 2013
16 May 2013
NEW YORK and LONDON – May 17, 2013 – Advanced Design Technology (ADT), a global leader in the development of advanced turbomachinery design methods and the TURBOdesign Suite, will exhibit in Booth 818 at the American Society of Mechanical Engineers (ASME) Turbo Expo 2013 June 3-7 at the San Antonio Convention Center in San Antonio, Texas. ADT and its U.S. affiliate, TURBODESIGN Technology (TDT) will demonstrate the TURBOdesign Suite and its three-dimensional (3D) inverse design optimization capabilities for superior turbomachinery performances. Design engineers and original equipment manufacturers can benefit by shortening development times and improving components efficiency and emissions using the TURBOdesign Suite and ADT’s/TDT’s engineering design services.
